#GRABIT SCREW EXTRACTOR FULL#

With the drill in reverse, we pulled the trigger.

Instructions memorized, we bored out the damaged head with the cutting end, then flipped the bit and tightened the chuck on the grabber. The machine screws there were in pretty good shape, considering the installer had been a bit overzealous when torquing them into place. Our shining success story happened at the screen door. For problematic automotive nuts and bolts, you're probably better off using the classic candle-wax-as-thread-lubricant trick detailed here. The only other common problem was the tendency of the bits to 'walk,' especially on the narrow bolts on the lawnmower. We're a society that doesn't read directions-we're so excited, we want to use it right away.' Amen to that! Using the tool the proper way, the cutting end carved such a smooth cone that the grabbing end had difficulty trying to, well, GRAB IT.Īside: Veteran infomercial script writer John Miller, interviewed for the ASOTV feature in PM's February issue, said, 'My biggest concern is that people aren't reading the directions, not using the product properly, and then are not going to get desired result. But the first time around, the grabbing end's single tooth, similar to the protrusion on a Forstner bit, had an easier time biting into whatever mangled facets remained. We retested the right way after a closer inspection of the instructions.

Take the hinge leaves and the stripped deck screws. But the funny thing is, the tool worked better when we had it backwards. The cutter carves a hole, you flip it around, and the extractor digs up the fastener. The GRABIT and Drill-Out are two-sided, with a cutting head on one end and an extracting head on the other.

#GRABIT SCREW EXTRACTOR FULL#

In the interest of full disclosure, we must confess that in our first tests, we mixed up the two ends of the tool. Play icon The triangle icon that indicates to play The Details: These tools went one for four-doesn't sound great, but when you're stuck with a fastener that's impossible to remove, getting even one out of there is better than nothing. To be fair, there's no easy way to deal with a flush-driven stripped screw. Removing new steel screws from hinge leaves, pulling broken, rusted bolts from a lawnmower, extracting stripped galvanized screws from a screen door, and attempting to yank stripped decking screws from weather-beaten, pressure-treated lumber. 'If you can use a drill, you can use a GRABIT.' The Test: The Drill-Out does the same for broken bolts. Flip the tool around, drive it in reverse, and the extracting head bites the cone to remove the screw. Drill out the damaged area with a cone-shaped cutting end to form a divot. Well, not anymore!' The GRABIT damaged screw and bolt remover extracts problem fasteners in 10 seconds. Supplied With:1 x No.1 bit 1 x No.2 bit 1 x No.3 bit 1 x No.'If you've ever stripped a screw or broken off the head of a bolt, you know how frustrating that can be. Technical Specification:Screw sizes - No.4 to No.24 Screws sizes - 3 mm to 9.5 mm Bolt sizes - M4 to M12 No.1 extractor for screw sizes - No.4 to No.7, bolt M4 No.2 extractor for screw sizes - No.6 to No.10, bolt M5 to M6 No.3 extractor for screw sizes - No.12 to No.14, bolt M8 No.4 extractor for screw sizes - No.16 to No.24, bolt M10 to M12 Note: Not designed for hardened screws. Set of four bit sizes No.1, No.2, No.3 and No.4. Hex shoulder to aid removal of jammed screw or bolt. Serrated extracting end of tool results in greater torque for hard to remove screws. Double-ended (burnisher & tapered thread). Removes screws made of any alloy including soft brass. Removes cleanly from wood, metal or plastic. 4 - 24 and broken bolts from size M4 - M12. The Trend model GRAB/SE2/SET, Grabit remover 4pc.

Grabit screw extractor